Bosch Rexroth R060200830 KBM-8 -DD-NR
Bosch Rexroth Lineair kogellager: R060200830 KBM-8 -DD-NR
- Deze lineair kogellager is momenteel helaas niet op voorraad. We helpen je graag met het vinden van een goed alternatief. Neem contact op voor deskundig advies of als je vragen hebt over de levertijd van dit product.
- Bouwgrootte -8-
- Binnen ø 8 mm
- Buiten ø 16 mm
- Lengte 25 mm
- Serie KBM
Uitverkocht
Eigenschappen van deze kogellager
| Binnen: | 8mm |
| Buiten: | 16mm |
| Breedte: | 25mm |
| Gewicht: | 0,022kg |
| Serie: | Standaard serie |
| Materiaal: | roestvast staal |
| Afdichting: | volledig afgedicht |
| Temperatuurbereik: | -10 tot +80 °C |
| Uitvoering: | gesloten uitvoering |
| Drukhoekcompensatie: | zonder correctie van uitlijningsfouten |
| Merk: | BOSCH REXROTH |
Informatie over Lineair kogellager: R060200830 KBM-8 -DD-NR
Standaard gesloten kogelbus voor een as diameter van 8 mm. Deze kogelbus is corrosiebestendig en toepasbaar in vervuilende omgevingen.
Artikelnummer fabrikant: R060200830
Artikelnaam: KBM-8 -DD-NR
Gerelateerde downloads
Alles over Bosch Rexroth
R060200830 KBM-8 -DD-NR is een kogellager gefabriceerd door Bosch Rexroth.
Bosch Rexroth is een wereldwijde leider in de aandrijf- en besturingstechnologie. Het bedrijf biedt innovatieve en betrouwbare oplossingen voor hydraulische, elektrische en mechanische aandrijfsystemen, en staat bekend om zijn hoogwaardige producten en klantgerichte benadering.
Meer over Bosch RexrothHulp van een deskundige nodig?
Jammer genoeg is R060200830 KBM-8 -DD-NR niet op voorraad. We helpen je graag met het vinden van een goed alternatief. Neem contact met ons op voor deskundig advies en het vinden van het juiste product.
STANDAARD KOGELBUS KBM-8-DD-NR &
| Productkenmerken |
R060200830
|
|---|---|
| Shaft diameter d [mm] | 8 |
| Format of linear bushings | – Closed |
| Series | Standard (metal) |
| Seal | 2 integrated wiper seals |
| Lubrication | Not lubricated |
| Maximum dynamic load capacity Cmax [N] | 240 |
| Max. acceleration amax [m/s²] | 100 |
| Maximum permissible linear speed vmax [m/s] | 2.5 |
| Length of linear bushing [mm] | 25 |
| Outer diameter D [mm] | 16 |
| Mass m [g] | 0.022 |
| Permissible ambient temperature | – 10 °C … + 80 °C |
| Footnote permissible ambient temperature (min … max) | Higher temperatures are only admissible at linear bushings without wiper seals with ball retainers made of steel. Make allowance for reductions in load capacity. |
| Friction coefficient μ | 0,001 … 0,004 |
| Footnote friction coefficient μ | Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. |
| Footnote minimum static load capacity C0min | null |
| Footnote shaft radial clearance h6 | Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. |
| Footnote friction force FR | One wiper seal: Multiply value with factor 0.5 |
| Footnote minimum dynamic load capacity Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote maximum dynamic load capacity Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote breakaway force | One wiper seal: Multiply value with factor 0.5 |
| Breakaway force [N] | 1 |
| Footnote maximum static load capacity C0max | null |
| Version | Corrosion-resistant |
| Weight [kg] | 0.02 |
| Dimension D [mm] | 16 |
| Dimension D1 [mm] | 15.2 |
| Dimension C h12 [mm] | 25 |
| Dimension C1 H13 [mm] | 16.2 |
| Dimension C2 [mm] | 1.1 |
